Raspberry Pi Zero 2W Setup Guide
Compact and efficient setup guide for using a Raspberry Pi Zero 2 W with AirCast.
Required Components
- Raspberry Pi Zero 2 W
- 5V/2.5A micro USB power supply
- 16GB+ microSD card (Class 10)
- USB OTG adapter
- USB hub (powered recommended)
- 4G USB modem (compact size preferred)
- Heatsink
Adapter Setup
Required Adapters
- USB OTG setup:
- Connect micro USB OTG adapter to USB port
- Use powered USB hub if multiple devices needed
- Keep cables short to minimize interference
Prepare SD Card
Before setting up your Raspberry Pi, you'll need to prepare your SD card with the operating system. We'll use Raspberry Pi OS Lite for optimal performance with AirCast.
Follow our detailed flashing guide to properly configure your SD card:
SD Card Flashing Guide →
Complete walkthrough for installing Raspberry Pi OS on your SD card with the correct settings
Important configuration requirements:
- • Choose "Raspberry Pi OS Lite (64-bit)" for best performance
- • Enable SSH access during setup for remote management
- • Configure your WiFi credentials if not using ethernet
- • Set a secure password for the 'pi' user
Initial Boot
- Insert the flashed MicroSD card into your Raspberry Pi
- Connect power to your Raspberry Pi
- Wait for the initial boot process (about 90 seconds)
Boot Indicators:
- • Green LED will flash during SD card access
- • Red LED indicates power connection
- • Wait for LED activity to stabilize
Next Steps: SSH Access
Now that you have flashed your Raspberry Pi OS, follow our SSH access guide to securely connect to your device:
SSH Access Guide →
Learn how to enable and connect to your Raspberry Pi via SSH
Before setting up SSH, ensure your Raspberry Pi:
- • Has Raspberry Pi OS installed
- • Is connected to your network
- • Is powered on and booted up
On This Page